Battens and booms?

Moderators: mje, chrstjrn, krudave

Post Reply
skyl4rk
paddler
Posts: 9
Joined: Sat Aug 13, 2016 3:17 pm

Battens and booms?

Post by skyl4rk »

I am looking for ideas for cheap battens and booms for sails. Are there any items that can be used as battens, or is it better to just buy the type you need? Same with booms, I may have some aluminum tubing used in an old tent. In the past I have debarked some tree branches and carved them down to the size I need. Are there any other materials that make a good boom?
Folbot Super

arcprof
forum fanatic
Posts: 53
Joined: Tue Dec 03, 2013 10:56 pm
Location: Auckland New Zealand

Re: Battens and booms?

Post by arcprof »

For the typically lightly loaded sails on kayaks and depending on the width of the batten pocket, laminate board as used on bench tops makes nice soft battens. Perspex sheeting is another good choice.
Aluminum tubing makes a good boom but you will need something a bit bigger in diameter than the tent poles typically found in hiker's tents. Klepper booms are only about 20mm but use a very strong alloy much better than the soft alloy found in your average tent pole. There is quite a load on a boom, particularly near the gooseneck and around any fittings that take the mainsheet with the exception of those used for stern sheeting at the far end of the boom. Nothing wrong with a wooden boom except they are a bit heavier and you don't want too much weight swinging round your ears.
Cheers Jim
Folbot:Super, Sporty, Greenland II, Klepper:1960's AE2, 1970's AE2, 1990's AE2000

skyl4rk
paddler
Posts: 9
Joined: Sat Aug 13, 2016 3:17 pm

Re: Battens and booms?

Post by skyl4rk »

arcprof wrote:... laminate board as used on bench tops makes nice soft battens. Perspex sheeting is another good choice. ...
Is laminate board the same as formica?

Perspex is plexiglass?

I am thinking about taking a piece of thin plywood and wrapping it in glass cloth and epoxy for a batten.

I would like to make a sail like the ones in this video

https://www.youtube.com/watch?v=XHQGUbMSPTM

It looks like the sprit "batten" would need to be quite strong.
Folbot Super

siravingmon
lord high faltbotmeister
Posts: 670
Joined: Fri Oct 07, 2011 1:51 pm
Location: Bangkok, Thailand

Re: Battens and booms?

Post by siravingmon »

You can use bits of hollow telescoping fishing rod for booms. These are available as blanks and are cheap and light. I use one on a 5 m2 Hobie sail
Simon

Feathercraft Wisper, Firstlight 420, Fujita Alpina AL-1 400, KXone Airrow 17, Nautiraid Geenlander 1, K1, 416, Narak 460 (sold my 550), Pakboats Quest 135, TRAK 2.0
Cape Falcon F1, Beth, Hobie AI
AE Air Fusion Evo wanted, Incept k40 for sale

jcwlx
forum fanatic
Posts: 75
Joined: Wed Feb 12, 2014 4:48 am
Location: Waukesha, Wisconsin and Shanghai, China

Re: Battens and booms?

Post by jcwlx »

Buy 6061 aircraft grade aluminum tubing from a metal wharehouser, like Speedy Metals in New Berlin, Wisconsin, cut to length. and add fittings by pop-riveting with aluminum rivets or stainless bolts. I made a 12 longer lower Klepper mast for my 1965 A2 (so I could raise the main sail and boom out of the way of my first mate's head, and make a 32 sq ft genoa to use in place of the standard 14 sq ft Klepper working jib on light wind days) , and a set of amas for my Balogh BOSS amas this way. Cost of this aluminum is quite inexpensive and easy to cut, machine, etc.
1965 Klepper Aerius 2 with 2005 Long Haul hull
1965 Klepper S4 sail rig, with 14 sq ft jib; Sail Rite 32 sq ft genoa; and 41 sq ft main
BSD/BOSS-Wilkes modified outriggers
Spring Creek outriggers
Souris River Canoe
Wegu 19'Sailboat

DLee
Brotherhood of the Golden Paddle
Posts: 1427
Joined: Sun Aug 16, 2009 10:05 pm
Location: South Salem, NY
Contact:

Re: Battens and booms?

Post by DLee »

I like the plywood idea for the batten. I think that would work. I'd try and get a marine ply that's 6~8 mm thick, round the edges and apply the fiberglass. I'd think you'd want it at least an inch or 1/ 1/4" wide.

The battens on my BSD sail are pretty stiff though... I don't think the ply would ever be that stiff though. You might check around some sail lofts and see if they have any real batten material laying around that you could cut down to size.

Keep us in the loop here. I think we'd all be interested to hear and see what you come up with.

d

PS, I'm sure you know, but those are Flat Earth Sails if you wanted to just buy one...
Klepper Aerius II
Klepper T9
Long Haul MK1 Expedition 'light'
Klepper S4 sail rig
Kayaksailor 1.6 +genoa
BSD 36HP

Post Reply

Return to “Sailing Gear”